(246 days)
Not Found
No
The document describes a traditional hip arthroplasty system and its components. There is no mention of AI, ML, image processing, or any data-driven analytical capabilities. The performance studies rely on engineering analysis, not algorithmic performance metrics.
Yes
The device is a total hip replacement system, used to treat severe pain and disability from joint conditions, traumatic fractures, or failed previous surgeries, directly addressing and alleviating a medical condition.
No
Explanation: The device is a total hip arthroplasty system used for hip replacement; it is a therapeutic device, not a diagnostic one.
No
The device description explicitly states the system consists of physical components like femoral stems, femoral heads, acetabular cups, polyethylene liners, and instrumentation for implantation. This indicates it is a hardware-based medical device, not software-only.
Based on the provided text, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use describes a surgical implant for replacing a hip joint due to various conditions. This is a therapeutic device, not a diagnostic one.
- Device Description: The device description details physical components like femoral stems, heads, cups, and liners, which are all parts of a surgical implant. It does not mention any reagents, test kits, or equipment used to examine samples from the human body.
- Lack of IVD Characteristics: There is no mention of analyzing biological samples (blood, urine, tissue, etc.), detecting markers, or providing diagnostic information.
IVD devices are used to perform tests on samples taken from the human body to provide information for diagnosis, monitoring, or screening. This device is a physical implant used in a surgical procedure.
N/A
Intended Use / Indications for Use
The FitRite™ Total Hip Arthroplasty System is indicated for total hip replacement in the following conditions: 1. A severely painful and/or disabled joint from osteoarthritis, rheumatoid arthritis, or congenital hip dysplasia. 2. Avascular necrosis of the femoral head. 3. Acute traumatic fracture of the femoral head or neck. 4. Failed previous hip surgery including joint reconstruction, arthrodesis, hemiarthroplasty, surface replacement arthroplasty, or total hip replacement. 5. Certain cases of ankylosis. The FitRite™ DDH Femoral Stems, Standard Femoral Stems, and Acetabular Cups are intended for cementless application: the FitRite™ Cemented Femoral Stems are intended for cemented application.
Product codes
JDI
Device Description
The FitRite™ Total Hip Arthroplasty System is used for primary total hip replacement in skeletally mature individuals. The system consists of uncemented femoral stems, CoCr femoral heads in various sizes and offsets, uncemented acetabular cups and conventional polyethylene liners. Instrumentation necessary for proper implantation is also included. The purpose of this submission is to introduce additional sizing of the cemented stems.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
Hip
Indicated Patient Age Range
Skeletally mature individuals
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies
Non-clinical testing: Engineering analysis was used to demonstrate that the new sizes of cemented stems do not introduce a new worst case and prior testing conducted on the predicate system demonstrate conformity to the applicable standards. Clinical testing: Clinical testing was not required to demonstrate substantial equivalence in this premarket notification.
Key Metrics
Not Found
Predicate Device(s)
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 888.3350 Hip joint metal/polymer semi-constrained cemented prosthesis.
(a)
Identification. A hip joint metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a hip joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. This generic type of device includes prostheses that have a femoral component made of alloys, such as cobalt-chromium-molybdenum, and an acetabular resurfacing component made of ultra-high molecular weight polyethylene and is limited to those prostheses intended for use with bone cement (§ 888.3027).(b)
Classification. Class II.
0
Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized image of three human profiles facing to the right, stacked on top of each other, representing the department's focus on people and health.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002
June 23, 2016
Excera Orthopedics, Incorporated % Mr. Kellen Hills Quality and Regulatory Consultant Orchid Design 4600 East Shelby Drive Memphis, Tennessee 38118
Re: K153057
Trade/Device Name: FitRite™ Total Hip Arthroplasty System Regulation Number: 21 CFR 888.3350 Regulation Name: Hip joint metal/polymer semi-constrained cemented prosthesis Regulatory Class: Class II Product Code: JDI Dated: May 17, 2016 Received: May 20, 2016
Dear Mr. Hills:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Parts 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set
1
forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely yours,
Vincent J. Devlin -S
for
- Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
2
Indications for Use
510(k) Number (if known)
K153057
Device Name
FitRite™ Total Hip Arthroplasty System
Indications for Use (Describe)
The FitRite™ Total Hip Arthroplasty System is indicated for total hip replacement in the following conditions: 1. A severely painful and/or disabled joint from osteoarthritis, rheumatoid arthritis, or congenital hip dysplasia.
-
Avascular necrosis of the femoral head.
-
Acute traumatic fracture of the femoral head or neck.
-
Failed previous hip surgery including joint reconstruction, arthrodesis, hemiarthroplasty, surface
replacement arthroplasty, or total hip replacement.
- Certain cases of ankylosis.
The FitRite™ DDH Femoral Stems, Standard Femoral Stems, and Acetabular Cups are intended for cementless application: the FitRite™ Cemented Femoral Stems are intended for cemented application.
Type of Use (Select one or both, as applicable)
Prescription Use (Part 21 CFR 801 Subpart D)
Over-The-Counter Use (21 CFR 801 Subpart C)
PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON A SEPARATE PAGE IF NEEDED.
FOR FDA USE ONLY
Concurrence of Center for Devices and Radiological Health (CDRH) (Signature)
This section applies only to requirements of the Paperwork Reduction Act of 1995.
DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.
The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:
Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff PRAStaff@fda.hhs.gov
"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."
3
| (a)(1) | Submitted By: | Excera Orthopedics, Inc.,
1188 Centre St,
Newton, MA 02459 |
|--------|------------------------------------|--------------------------------------------------------------------------------|
| | Phone: | 901-433-1990 |
| | Fax: | 901-433-1989 |
| | Date: | May 17, 2016 |
| | Contact Persons | |
| | Primary: | Kellen Hills (Orchid Design Consulting) |
| | Secondary: | Scott Coleridge (Excera Orthopedics, Inc) |
| (a)(2) | Proprietary Name: | FitRite™ Total Hip Arthroplasty System |
| | Common Name: | Total Hip Prosthesis |
| | Classification Name and Reference: | 21CFR 888.3350-Hip joint metal/polymer
semi-constrained cemented prosthesis |
| | Product Code: | JDI |
| (a)(3) | Predicate Devices: | |
| | Primary: | FitRite™ Total Hip Arthroplasty System |
- (a)(4) Device Description:
The FitRite™ Total Hip Arthroplasty System is used for primary total hip replacement in skeletally mature individuals. The system consists of uncemented femoral stems, CoCr femoral heads in various sizes and offsets, uncemented acetabular cups and conventional polyethylene liners. Instrumentation necessary for proper implantation is also included.
(K140547)
The purpose of this submission is to introduce additional sizing of the cemented stems.
(a)(5) Indications for Use:
The FitRite™ Total Hip Arthroplasty System is indicated for total hip replacement in the following conditions:
-
A severely painful and/or disabled joint from osteoarthritis, traumatic arthritis, rheumatoid arthritis, or congenital hip dysplasia.
-
Avascular necrosis of the femoral head.
-
Acute traumatic fracture of the femoral head or neck.
-
Failed previous hip surgery including joint reconstruction, internal fixation, arthrodesis,
hemiarthroplasty, surface replacement arthroplasty, or total hip replacement.
-
- Certain cases of ankylosis.
The FitRite™ DDH Femoral Stems, Standard Femoral Stems, and Acetabular Cups are intended for cementless application; the FitRite™ Cemented Femoral Stems are intended for cemented application.
- Certain cases of ankylosis.
-
Comparison of Technological Characteristics: (a)(6)
4
The FitRite™ Total Hip Arthroplasty System is substantially equivalent to the previously cleared predicate devices based on similarities in intended use, design, materials, manufacturing methods, packaging, sterilization and mechanical performance. The technological characteristics do not raise any new questions of safety and efficacy.
- (b)(1) Non-clinical testing:
Engineering analysis was used to demonstrate that the new sizes of cemented stems do not introduce a new worst case and prior testing conducted on the predicate system demonstrate conformity to the applicable standards.
(b)(2) Clinical testing:
Clinical testing was not required to demonstrate substantial equivalence in this premarket notification.
(b)(3) Conclusions:
Based on the information provided in this premarket notification, we believe that the subject FitRite™ Total Hip Arthroplasty System demonstrates substantial equivalence to the identified predicate devices.