(262 days)
None
No
The device description and performance studies focus on the mechanical components and structural integrity of an external fixation system, with no mention of software, algorithms, or data processing that would indicate AI/ML.
Yes.
The device is used for fracture fixation, arthrodesis, osteotomy, and reconstruction, among other therapeutic indications in the lower extremity.
No
The MDPO Frame System is an external fixation system used for various orthopedic conditions in the lower extremity, such as fracture fixation, arthrodesis, and deformity correction. Its function is to provide mechanical support and stabilization, not to diagnose medical conditions.
No
The device description explicitly lists numerous hardware components made of materials like stainless steel, carbon fiber, Radel, and aluminum, indicating it is a physical external fixation system, not software.
Based on the provided information, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- Intended Use: The intended use clearly describes a device used for surgical fixation and reconstruction of bones and soft tissues in the lower extremity. This is a direct medical intervention on the patient's body.
- Device Description: The device components are all mechanical parts designed to be implanted or attached externally to the patient's limb.
- Lack of IVD Characteristics: There is no mention of the device being used to examine specimens derived from the human body (like blood, urine, tissue, etc.) to provide information for diagnosis, monitoring, or treatment.
IVD devices are used to perform tests on samples taken from the body, not to directly treat or support the body itself. This device is a surgical external fixation system.
N/A
Intended Use / Indications for Use
The MDPO Frame System is indicated for use in the lower extremity for: open and closed long bone fracture fixation, to include tensioned wire fixation of periarticular fractures, arthrodesis, osteotomy, reconstruction, non-unions, pseudoarthrosis, correction of bony or soft tissue defects and deformities, dislocations, arthrodiastasis, and Charcot foot reconstruction and Lisfranc dislocations.
Product codes
KTT, JDW
Device Description
The MDPO Frame System is an external fixation system that can be made into various configurations for lower limb application. The MDPO Frame System includes the following components: Half Pins, Wires, Footplate consisting of the Connecting Plate/Assembly with interchanging Medial and Lateral Arch Plates/Assemblies, Matching Rings, Open Rings, Closed Circular Rings, Columns, Threaded Rods, Sockets, Screws, Bolts, Nuts, Washers, Posts, and Cubes.
The components of the MDPO Frame System are made from stainless steel, carbon fiber, Radel or aluminum.
All components are designed for single use only.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
lower extremity
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies
Construct fatigue testing and in-plane compression strength testing were conducted on the MDPO Frame System and the Ilizarov External Fixation System. It was determined that the MDPO Frame System was at least equivalent in strength to the Ilizarov External Fixation System.
Key Metrics
Not Found
Predicate Device(s)
K870961, K962808, K994143, K083789, K071395, K093057
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 888.3030 Single/multiple component metallic bone fixation appliances and accessories.
(a)
Identification. Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.(b)
Classification. Class II.
0
MDPO Frame System 510(k) Summary K093753
| Device Manufacturer: | MDPO LLC
1560 Sawgrass Corporate Pkwy
Suite 400
Sunrise, FL 33323 |
|----------------------|---------------------------------------------------------------------------------------------------------------------------------------------------|
| Primary Contact: | Marcos Velez-Duran
M Squared Associates, Inc.
Tel: 703-562-9800, Ext 206
Fax: 703-562-9797
Email: mvelez-duran@msquaredassociates.com |
| Proprietary Name: | MDPO Frame System |
| Classification Name: | 888.3030 Single/multiple component metallic bone fixation
appliances and accessories |
| Common Name: | External Fixation Frame Components |
| Device Class: | Class II |
| Product Codes: | KTT and JDW |
| | AUG 26 2010 |
Device Description and Intended Use:
The MDPO Frame System is an external fixation system that can be made into various configurations for lower limb application. The MDPO Frame System includes the following components: Half Pins, Wires, Footplate consisting of the Connecting Plate/Assembly with interchanging Medial and Lateral Arch Plates/Assemblies, Matching Rings, Open Rings, Closed Circular Rings, Columns, Threaded Rods, Sockets, Screws, Bolts, Nuts, Washers, Posts, and Cubes.
The components of the MDPO Frame System are made from stainless steel, carbon fiber, Radel or aluminum.
All components are designed for single use only.
The MDPO Frame System is indicated for use in the lower extremity for: open and closed long bone fracture fixation, to include tensioned wire fixation of periarticular fractures, arthrodesis, osteotomy, reconstruction, non-unions, pseudoarthrosis, correction of bony or soft tissue defects and deformities, dislocations, arthrodiastasis, and Charcot foot reconstruction and Lisfranc dislocations.
: "
1
MDPO Frame System 510(k) Summary K093753
Predicate Devices:
The MDPO Frame System is similar to several predicates including the following:
- Smith & Nephew Ilizarov External Fixation System (K870961, K962808, K994143) .
- DePuy ACE-Fischer External Fixation System (K083789) .
- . Biomet Vision FootRing System (K071395, K093057)
Technological Characteristics
The MDPO Frame System was characterized and evaluated according applicable requirements outlined in ASTM F1541-02 (2007), Standard Specification and Test Methods for External Fixation Devices and the FDA Reviewers Guidance Checklist for Orthopedic External Fixation Devices. Specifically, construct fatigue testing and inplane compression strength testing were conducted. Construct fatigue testing was conducted on the MDPO Frame System and the Ilizarov External Fixation System and it was determined that the MDPO Frame System was at least equivalent in strength to the Ilizarov External Fixation System. In-plane compression strength testing of the simple bridge ring elements was also conducted on both the MDPO Frame System and the Ilizarov External Fixation System. The strength testing also confirmed that the MDPO Frame System is at least equivalent to the Ilizarov External Fixation System.
Substantial Equivalence Information:
The MDPO Frame System is similar to legally marketed devices including the Smith & Nephew Ilizarov External Fixation System, DePuy ACE-Fischer External Fixation System, and the Biomet Vision FootRing System. The MDPO Frame System has similar indications for use and technological characteristics as these predicate systems. While MDPO Frame System includes stainless steel Rods and Radel Columns and the predicate systems utilize stainless steel rods, construct fatigue testing confirmed that the Radel Columns are substantially equivalent to the Ilizarov stainless steel rods. Therefore, the MDPO Frame System is determined to be substantially equivalent to the predicate devices.
2
DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of an eagle with its wings spread, symbolizing the department's mission to protect the health of all Americans.
Public Health Service
Food and Drug Administration 10903 New Hampshire Avenue Document Control Room W-O66-0609 Silver Spring, MD 20993-0002
MDPO, LLC % M Squared Associates, Inc. Mr. Marcos Velez-Duran 901 King Street, Suite 200 Alexandria, Virginia 22314
AUG 26 2010
Re: K093753
Trade/Device Name: MDPO Frame System Regulation Number: 21 CFR 888.3030 Regulation Name: Single/Multiple component metallic bone fixation appliances and accessories Regulatory Class: Class II Product Code: KTT, JDW
Dated: July 12, 2010 Received: July 13, 2010
Dear Mr. Velez-Duran:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical
3
Page 2 - Mr. Marcos Velez-Duran
device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely yours.
Barbara Buehns
Mark N. Melkerson Director Division of Surgical, Orthopedic and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
4
Indications for Use Statement
510(k) Number: K093753
Device Name: MDPO Frame System
Indications for Use:
The MDPO Frame System is indicated for use in the lower extremity for: open and closed long bone fracture fixation, to include tensioned wire fixation of periarticular fractures, arthrodesis, osteotomy, reconstruction, non-unions, pseudoarthrosis, correction of bony or soft tissue defects and deformities, dislocations, arthrodiastasis, and Charcot foot reconstruction and Lisfranc dislocations.
AND/OR Prescription Use X --------(Part 21 CFR 801 Subpart D)
Over-The-Counter Use _ (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
(Division Sign OA) Division of Surgical, Orthopedic, and Restorative Devices
510(k) Number K093753