(90 days)
Not Found
No
The device description and intended use clearly describe a simple magnetic switch mechanism with no mention of computational processing, learning, or data analysis.
No
The device, a patient magnet, is used to temporarily turn off a pulse generator to check its battery. It does not directly provide therapy but rather interacts with another device (pulse generator) for diagnostic/testing purposes.
No
The device is used to temporarily turn off a pulse generator to "check that the pulse generator battery is working." This is a functional check, not a diagnostic assessment of a medical condition or disease.
No
The device description clearly states the device is a physical magnet made from Neodymium and coated with polypropylene copolymer, and includes accessories like a watchband and belt-clip. This indicates it is a hardware device, not software.
Based on the provided information, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- IVD Definition: In Vitro Diagnostic devices are used to examine specimens taken from the human body (like blood, urine, tissue) to provide information for diagnosis, monitoring, or screening.
- Device Function: The described device is a magnet used externally to interact with an implanted pulse generator (likely a pacemaker or similar device). It's used to temporarily turn the pulse generator off for testing its battery function.
- No Specimen Analysis: The device does not analyze any biological specimens from the patient. Its function is purely physical interaction with another medical device.
Therefore, this device falls outside the scope of an In Vitro Diagnostic device. It is a medical device, but not an IVD.
N/A
Intended Use / Indications for Use
The patient magnet is used to close the reed switch of a pulse generator when held above the reed switch, 1 inch from the generator's surface, and oriented with the magnet's axis parallel to the longitudinal axis of the reed switch.
Product codes
DTG
Device Description
The patient magnet is used daily to check that the pulse generator battery is working. When you pass or hold the magnet over the pulse generator, a reed switch inside the pulse generator closes like a gate. When the magnet closes the switch, the normal signal (stimulation) cannot pass, and the pulse generator is temporarily turned OFF. When the magnet is removed, the switch (gate) opens immediately, and the pulse generator is turned back ON and can stimulate again.
The patient magnets are made from Neodymium grade 35 (NdFeB-35) and the entire surface of the magnet is coated with either polypropylene copolymer. The magnet is 1.48 in. x 0.195 in; 50 gauss (G) minimum magnetic flux density at a distance of 1 inch from its surface. Also supplied with Patient Magnet, are a watchband and a belt-clip that allows that patient to wear the magnet on the wrist like a watch or clipped on belt like a pager for easy deployment.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
Not Found
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Not Found
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s)
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 870.3690 Pacemaker test magnet.
(a)
Identification. A pacemaker test magnet is a device used to test an inhibited or triggered type of pacemaker pulse generator and cause an inhibited or triggered generator to revert to asynchronous operation.(b)
Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 870.9.
0
510(k) SUMMARY
| Submitted by: | Karen Stueber, Domestic Regulatory Specialist
Cyberonics, Inc.
100 Cyberonics Blvd.
Houston TX 77058
Tel: 281-228-7287 Fax: 281-853-2587
Email: karen.stueber@cyberonics.com | NOV - 3 2009 |
|--------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------|
| Date of Summary: | July 31, 2009 | |
| Trade Name: | Cyberonics Patient Magnet, Models 220-3 & 220-4
Cyberonics Block Magnet, Model 220-1
Cyberonics Horseshoe Magnet, Model 220-2 | |
| Common/Usual Name: | Patient Magnet | |
Classification Name: Regulation Number: Devices Class: Product Code:
Pacemaker Test Magnet 21 CFR 870.3690 Class I DTG
Intended Use:
The patient magnets shall be able to close the reed switch of a pulse generator when held above the reed switch, 1 inch from the generator's surface and oriented with the magnet's axis parallel to the longitudinal axis of the reed switch.
Predicate Devices:
Pacesetter Systems, Pacemaker Test Magnet (K813153)
Substantial Equivalence:
The Model 220 Patient Magnet is similar with respect to intended use and materials to the above 510(k) cleared predicate device.
Device Description
The patient magnet is used daily to check that the pulse generator battery is working. When you pass or hold the magnet over the pulse generator, a reed switch inside the pulse generator closes like a gate. When the magnet closes the switch, the normal signal (stimulation) cannot pass, and the pulse generator is temporarily turned OFF. When the magnet is removed, the switch (gate) opens immediately, and the pulse generator is turned back ON and can stimulate again.
The patient magnets are made from Neodymium grade 35 (NdFeB-35) and the entire surface of the magnet is coated with either polypropylene copolymer. The magnet is 1.48 in. x 0.195 in; 50 gauss (G) minimum magnetic flux density at a distance of 1 inch from its surface. Also supplied with Patient Magnet, are a watchband and a belt-clip that allows that patient to wear the magnet on the wrist like a watch or clipped on belt like a pager for easy deployment.
1
Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle with its wings spread, positioned to the right of a circular emblem. Encircling the eagle is the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" in a circular arrangement. The text is in all capital letters and is evenly spaced around the circle.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Room W-O66-0609 Silver Spring, MD 20993-0002
NOV - 3 2009
Cyberonics, Inc. c/o Ms. Karen B. Stueber Domestic Regulatory Specialist 100 Cyberonics Road Houston, TX 77058
Re: K092364
Trade/Device Name: Model 220, Patient Magnet Regulation Number: 21 CFR 870.3690 Regulation Name: Patient Magnet Regulatory Class: Class I Product Code: DTG Dated: August 03, 2009 Received: August 05, 2009
Dear Ms. Stueber:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
2
Page 2 - Ms. Karen B. Stueber
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.
Sincerely yours,
W. Mac A.
Bram Zuckerman, MD Director . Division of Cardiovascular Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
3
Indications for Use
510(k) Number (if known): K092364
Device Name: _________________________________________________________________________________________________________________________________________________________________
Indications for Use:
The patient magnet is used to close the reed switch of a pulse generator when held above the reed switch, 1 inch from the generator's surface, and oriented with the magnet's axis parallel to the longitudinal axis of the reed switch.
Prescription Use (Part 21 CFR 801 Subpart D)
AND/OR
Over-The-Counter Use (21 CFR 801 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
| (Division Sign-Off) | Page 1 of 1 |
|---|---|
| Division of Cardiovascular Devices | |
| 510(k) Number | K092364 |