(50 days)
Not Found
Not Found
No
The document describes software modifications to enhance safety features but does not mention AI or ML technologies.
Yes
Explanation: The device is an infusion pump designed to deliver fluids, drugs, and blood products, which are used for treatment and management of medical conditions.
No
Explanation: The device description states that the Baxter Colleague Infusion Pumps are designed to meet fluid delivery requirements and provide continuous or intermittent delivery of solutions. This indicates a therapeutic function, not a diagnostic one.
No
The device description explicitly states that the device is an infusion pump which uses a shuttle and valve control system mechanism, indicating it is a hardware device with software components, not a software-only device.
Based on the provided information, this device is not an IVD (In Vitro Diagnostic).
Here's why:
- IVD Definition: In Vitro Diagnostic devices are used to examine specimens taken from the human body (like blood, urine, or tissue) to provide information about a person's health. This testing is done outside of the body.
- Device Function: The Baxter Colleague Infusion Pump is designed to deliver fluids, drugs, and blood products into the patient's body. It is an active medical device used for treatment and administration, not for testing samples.
- Intended Use: The intended use clearly describes the delivery of substances via various routes of administration, not the analysis of biological samples.
Therefore, the function and intended use of the Baxter Colleague Infusion Pump fall outside the scope of an In Vitro Diagnostic device.
N/A
Intended Use / Indications for Use
Colleague Volumetric Infusion Pumps are electronic infusion pumps indicated for continuous or intermittent delivery of solutions through clinically acceptable routes of administration such as intravenous (IV), intra-arterial (IA), subcutaneous, epidural or irrigation of fluid spaces.
Baxter Colleague Infusion Pumps are designed to meet the fluid delivery needs of a wide variety of clinical acceptable routes of administration, for the acute and alternate care environment. These pumps can be utilized for continuous or intermittent fluid delivery and or irrigation of fluid spaces applications.
Fluid delivery applications include:
- parenteral fluids, drugs and electrolytes (e.g. cardiovascular drugs, antibiotics, analgesics, or solutions for irrigation procedures, etc.); and
- whole blood and blood products.
Colleague Infusion Pumps are designed to travel the continuum of care, following the patient into a variety of care areas, including, but not limited to:
- Hospital:
- General Floor
- Medical/Surgical
- Critical/Intensive Care Areas
- Pediatrics/Neonatal
- Labor/Delivery/Post Partum
- OR/Anesthesia
- Post Anesthesia/Recovery
- Cardiac Cath Lab
- Emergency Room
- Burn/Trauma Units
- Oncology
- Mobile Intensive Care
- Nursing Homes
- Homecare* (*Colleague and Colleague CX pumps only.)
- Blood Centers
- Nuclear Medicine
- Hospice
- Subacute Facilities
- Outpatient/Surgical Centers
- Long Term Care
Product codes
FRN
Device Description
Colleague pumps use a shuttle and valve control system mechanism to provide accurate, continuous infusions. Colleague provides continuous infusion and combined modes of operation. The pumps have configurable input parameters, which allow institutions to pre-select which modes of operation will be available to users and which units of measure will be used for data entry. Baxter Healthcare proposes to modify the Colleague family of infusion pumps with the addition of new software features to expand the Colleague Guardian feature and to further enhance the safety of the device.
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
Not Found
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Acute and alternate care environment, including but not limited to: Hospital (General Floor, Medical/Surgical, Critical/Intensive Care Areas, Pediatrics/Neonatal, Labor/Delivery/Post Partum, OR/Anesthesia), Post Anesthesia/Recovery, Cardiac Cath Lab, Emergency Room, Burn/Trauma Units, Oncology, Mobile Intensive Care, Nursing Homes, Homecare, Blood Centers, Nuclear Medicine, Hospice, Subacute Facilities, Outpatient/Surgical Centers, Long Term Care.
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
The performance data indicate that the device will meet specified requirements and is substantially equivalent to the predicate devices.
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s)
Colleague Volumetric Infusion Pumps
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 880.5725 Infusion pump.
(a)
Identification. An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.(b)
Classification. Class II (performance standards).
0
JUN 2 5 2004
510(k) Summary of Safety and Effectiveness
Submitted by:
Jennifer M. Paine Manager, Global Regulatory Affairs Baxter Healthcare Corporation Medication Delivery Rte. 120 and Wilson Road Round Lake, IL 60073
Name/Classification of Device:
Infusion Pump/ Class II, 80FRN - 21 CFR 880.5725
Trade Name:
Colleague Volumetric Infusion Pump Colleague CX Volumetric Infusion Pump Colleague 3 Volumetric Infusion Pump Colleague 3CX Volumetric Infusion Pump
Predicate Devices:
Colleague Volumetric Infusion Pumps
Statement of Intended Use:
Colleague Volumetric Infusion Pumps are electronic infusion pumps indicated for continuous or intermittent delivery of solutions through clinically acceptable routes of administration such as intravenous (IV), intra-arterial (IA), subcutaneous, epidural or irrigation of fluid spaces.
Device Description:
Colleague pumps use a shuttle and valve control system mechanism to provide accurate, continuous infusions. Colleague provides continuous infusion and combined modes of operation. The pumps have configurable input parameters, which allow institutions to pre-select which modes of operation will be available to users and which units of measure will be used for data entry. Baxter Healthcare proposes to modify the Colleague family of infusion pumps with the addition of new software features to expand the Colleague Guardian feature and to further enhance the safety of the device.
1
Summary of Technological Characteristics of New Device to Predicate Devices:
A comparison of the technological characteristics of the Colleague pump to the predicate r companion of the results of this comparison demonstrate that the actions has boom performant to the marketed predicate device in technological characteristics.
Performance Data:
The performance data indicate that the device will meet specified requirements and is substantially equivalent to the predicate devices.
2
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an abstract symbol that resembles a stylized caduceus or a bird-like figure with three curved lines representing wings or snakes.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
JUN 2 5 2004
Ms. Amy Giertych Director, Global Regulatory Affairs Baxter Healthcare Corporation Medication Delivery Route 120 & Wilson Road Round Lake, Illinois 60073-0490
Re: K041191
Trade/Device Name: Colleague Volumetric Infusion Pumps Regulation Number: 880.5725 Regulation Name: Infusion Pumps Regulatory Class: II Product Code: FRN Dated: May 5, 2004 Received: May 6, 2004
Dear Ms. Giertych:
We have reviewed your Section 510(k) premarket notification of intent to market the device We have reviewed your becament in device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Interstate commerce prior to ria] 2007 reclassified in accordance with the provisions of Allientifications, of to devices that have act (Act) that do not require approval of a premarket the rederal I ood, Drag, therefore, market the device, subject to the general approval approvisions of the Act. The general controls provisions of the Act include controls provisions of the rion fisting of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III II your device is classified (500 above) with the major regulations affecting (PMA), it may be subject to Sach adatof Federal Regulations, Title 21, Parts 800 to 898. In your device can be found in the Court in Concerning your device in the Federal Register.
3
Page 2 - Ms. Giertych
Please be advised that FDA's issuance of a substantial equivalence determination does not Please be advised that FDA 3 issualled on that your device complies with other requirements mean that FDA has made a decermination administered by other Federal agencies.
of the Act or any Federal statutes and regulations administed to sectimited to sectimited to se of the Act of ally rederal statues and regulations, but not limited to: registration You must configity with an the Fict b required (21 CFR Part 801); good manufacturing practice and listing (21 CFR Part 007), mooiity systems (QS) regulation (21 CFR Part 820); and if requirements as set form in the quality systems (Sections 531-542 of the Act); 21 CFR 1000-1050.
This letter will allow you to begin marketing your device as described in your Section 510(k) I his letter will anow you to begin mailering your substantial equivalence of your device to a premarket nonification. The PDA miams of basessification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), If you desire specific advice to: Jour de at (301) 594-4618. Also, please note the regulation please contact the Other or Ochiphanes and premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the may obtain other general mornist. International and Consumer Assistance at its toll-free Division (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html
Sincerely yours,
Chi-Lien, Ph.D.
Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
4
Indications for Use
510(k) Number (if known): K041191
Colleague Volumetric Infusion pumps Device Name:
Indications For Use:
Baxter Colleague Infusion Pumps are designed to meet the fluid delivery the little and aligically acceptable Baxter Colleague Intusion Pumps are not nervised on the more of bricaly of clinical acceptable routes
environment. These pumps can be utilized for continuous or internation environment. These pumps can be unized for continuous of misomation and or irrigation of fluid spaces applications.
Fluid delivery applications include:
- parenteral fluids, drugs and electrolytes (e.g. cardiovascular drugs, antibiotics, analgesics, or . parenteral nulds, drugs and electrolytes (e.g. cardiovalial drago, and be surions for irrigation procedures, etc.); and
- whole blood and blood products. .
Colleague Infusion Pumps are designed to travel the continuum of care, following the patient into a variety of care areas, including, but not limited to:
- A Hospital:
- General Floor
- · Medical/Surgical
- · Critical/Intensive Care Areas
- · Pediatrics/Neonatal
- · Labor/Delivery/Post Partum
- · OR/Anesthesia
- · Post Anesthesia/Recovery · P
- Cardiac Cath Lab
- · Emergency Room
- · Burn/Trauma Units
- Mobile Intensive Care A Nursing Homes A
- Homecare* A
· Oncology
- *Colleague and Colleague CX pumps only.
Prescription Use × (Part 21 CFR 801 Subpart D) AND/OR
Over-The-Counter Use_ (21 CFR 807 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Shene Narence for ADW 6/24/04
(Division Sign-Off) Division of Anesthesiology. General Hospital, Infection Control. Dental Dev
Page 1 of 1
510(k) Number: K241191
- Blood Centers
- Nuclear Medicine A
- Hospice A
- Subacute Facilities A
- Outpatient/Surgical Centers A
- Long Term Care A