(43 days)
Not Found
Not Found
No
The summary describes a susceptibility testing plate for bacteria, which is a chemical/biological assay, not a software or imaging device typically associated with AI/ML in medical devices. There are no mentions of AI, ML, image processing, or software algorithms.
No
The device is described as an in vitro diagnostic device for susceptibility testing, which provides information for treatment but does not directly treat a condition.
Yes
The "Intended Use / Indications for Use" section explicitly states that the device "is an in vitro diagnostic device for quantitative susceptibility testing."
No
The device is described as an "in vitro diagnostic device" and a "susceptibility plate," which are physical components used in laboratory testing, not software.
Yes, this device is an IVD (In Vitro Diagnostic).
The "Intended Use / Indications for Use" section explicitly states:
"The Sensititre Haemophilus/Streptococcus pneumoniae (HP) MIC Susceptibility plate is an in vitro diagnostic device for quantitative susceptibility testing of Streptococcus pneumoniae and Haemophilus influenzae."
N/A
Intended Use / Indications for Use
The Sensititre™ Haemophilus/Streptococcus pneumoniae (HP) MIC Susceptibility plate is an in vitro diagnostic device used for the susceptibility testing of Streptococcus pneumoniae and Haemophilus influenzae.
This 510(k) is for the addition of Cefotaxime in the dilution range of 0.016 - 4 µg/ml to the Sensititre Haemophilus pneumoniae MIC panel for testing Streptococcus pneumoniae and Haemophilus influenzae isolates. The "Indications for Use" and clinical significance of Cefotaxime is for: Streptococcus pneumoniae
Product codes
LTT, JWY
Device Description
Sensititre™ Haemophilus/Streptococcus pneumoniae (HP) MIC Susceptibility Plates, Cefotaxime
Mentions image processing
Not Found
Mentions AI, DNN, or ML
Not Found
Input Imaging Modality
Not Found
Anatomical Site
Not Found
Indicated Patient Age Range
Not Found
Intended User / Care Setting
Not Found
Description of the training set, sample size, data source, and annotation protocol
Not Found
Description of the test set, sample size, data source, and annotation protocol
Not Found
Summary of Performance Studies (study type, sample size, AUC, MRMC, standalone performance, key results)
Not Found
Key Metrics (Sensitivity, Specificity, PPV, NPV, etc.)
Not Found
Predicate Device(s)
Not Found
Reference Device(s)
Not Found
Predetermined Change Control Plan (PCCP) - All Relevant Information
Not Found
§ 866.1640 Antimicrobial susceptibility test powder.
(a)
Identification. An antimicrobial susceptibility test powder is a device that consists of an antimicrobial drug powder packaged in vials in specified amounts and intended for use in clinical laboratories for determining in vitro susceptibility of bacterial pathogens to these therapeutic agents. Test results are used to determine the antimicrobial agent of choice in the treatment of bacterial diseases.(b)
Classification. Class II (performance standards).
0
DEPARTMENT OF HEALTH & HUMAN SERVICES
Public Health Service
Food and Drug Administration 2098 Gaither Road Rockville MD 20850
Ms. Cynthia C. Knapp Director of Lab Services Trek Diagnostic Systems, Inc. 29299 Clemens Road, Suite 1-K Westlake, OH 44145
Re: K013195
Trade/Device Name: Sensititre™ Haemophilus/Streptococcus pneumoniae (HP) MIC Susceptibility Plates, Cefotaxime Regulation Number: 21 CFR 866.1640 Regulation Name: Antimicrobial Susceptibility Test Powder Regulatory Class: II Product Code: LTT, JWY Dated: September 24, 2001 Received: September 25, 2001
NOV 0 7 2001
Dear Ms. Knapp:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
1
Page 2 -
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and 1 additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrb/dsma/dsmamain.html".
Sincerely yours,
Steven Butman
Steven I. Gutman, M.D., M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
2
NOV 0 7 2001
KD13195
510 (k) Number (If known): KO13195
Device Name: Sensititre Haemophilus/Streptococcus pneumoniae (HP) MIC Susceptibility Plates.
Indications For Use:
The Sensititre Haemophilus/Streptococcus pneumoniae (HP) MIC Susceptibility plate is an in The Sensiture Hacmophilas Occeptibility testing of Streptococcus pneumoniae and Haemophilus influenzae.
This 510(k) is for the addition of Cefotaxime in the dilution range of 0.016 - 4 µgml to the I his 510(k) is for the adultion of Celotaxino in vie MIC panel for testing Streptococcus Sensitire Haemophilus influenzae isolates. The "Indications for Use" and clinical significance of Cefotaxime is for: Streptococcus pneumoniae
(PLEASE DO NOT WRITE BELOW THIS LINE- CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
|--|--|
Freddie H. Poole
(Division Sign-Off)
Division of Clinical Laboratory Devices
| 510(k) Number | K013195 |
|---|---|
| --------------- | --------- |
| Prescription Use
| (Per 21 CFR 801.109 | ✓ | OR | Over-The-Counter Use _________ |
|---|---|---|---|
| ----------------------------------------- | --- | ---- | -------------------------------- |