BEGOCER G

K983082 · Bego U.S.A. · EJT · Oct 28, 1998 · Dental

Device Facts

Record IDK983082
Device NameBEGOCER G
ApplicantBego U.S.A.
Product CodeEJT · Dental
Decision DateOct 28, 1998
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 872.3060
Device ClassClass 2

Intended Use

BegoCer G is a crown and bridge metal to ceramic type 4 alloy. It is a medical device in Class IIa according to Annex IX.

Device Story

BegoCer G is a type 4 dental alloy intended for use in crown and bridge restorations. It functions as a metal-to-ceramic substrate. The device is used by dental professionals in a laboratory or clinical setting to fabricate dental prosthetics. It provides a structural framework for ceramic layering, benefiting patients by restoring dental function and aesthetics.

Clinical Evidence

No clinical data provided; device is a dental casting alloy evaluated via standard material properties.

Technological Characteristics

Type 4 dental alloy for crown and bridge applications. Classified as Class IIa medical device. Material composition and physical properties consistent with standard dental casting alloys for metal-to-ceramic restorations.

Indications for Use

Indicated for use as a crown and bridge metal to ceramic type 4 alloy for dental restorations.

Regulatory Classification

Identification

A noble metal alloy is a device composed primarily of noble metals, such as gold, palladium, platinum, or silver, that is intended for use in the fabrication of cast or porcelain-fused-to-metal crown and bridge restorations.

Special Controls

*Classification.* Class II (special controls). The special control for these devices is FDA's “Class II Special Controls Guidance Document: Dental Noble Metal Alloys.” The devices are exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 872.9. See § 872.1(e) for availability of guidance information.

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the seal of the U.S. Department of Health & Human Services. The seal features a stylized eagle with three lines forming its body and wings. The eagle faces right and is positioned in the center of a circular border. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" is arranged around the top half of the circle. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 OCT 2 8 1998 Mr. William J. Oremus General Manager BEGO U.S.A., Incorporated 1088 Main Street, Suite 200 Pawtucket, Rhode Island 02860 Re : K983082 BegoCer® G Trade Name: Regulatory Class: II Product Code: EJT Dated: Auqust 17, 1998 September 2, 1998 Received: Dear Mr. Oremus: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual registration, listing of devices, qood manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major requlations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. ਕ substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) requlation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. {1}------------------------------------------------ Page 2 - Mr. Oremus This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours. Clator Timothy A. Ulatowsk Director Division of Dental, Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ Page loof 1 : · K983082 510(k) Number (if known): BegoCer G Device Name:__________________________________________________________________________________________________________________________________________________________________ Indications For Use: . BegoCer G is a crown and bridge metal to ceramic type 4 alloy. It is a medical device in Degood of is a crown and enegal Class Ha according to Annex IX. (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) | | <div> <img alt="signature" src="signature"/> </div> <div>(Division Sign-Off)</div> | |---------------------------------------------------------------------|------------------------------------------------------------------------------------| | Division of Dental, Infection Control, and General Hospital Devices | | | 510(k) Number | 4983082 | | Prescription Use (Per 21 CFR 801.109) <img alt="check" src="check"/> | OR | Over-The-Counter Use ______ | |----------------------------------------------------------------------|----|-----------------------------| |----------------------------------------------------------------------|----|-----------------------------| (Optional Format 1-2-96)------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%