WORLDWIDE MEDICAL TECHNOLOGIES INTRACERVICAL BLOCK NEEDLE, MODEL TBD
K982097 · Worldwide Medical Technologies, LLC · FMI · Jun 25, 1998 · General Hospital
Device Facts
| Record ID | K982097 |
| Device Name | WORLDWIDE MEDICAL TECHNOLOGIES INTRACERVICAL BLOCK NEEDLE, MODEL TBD |
| Applicant | Worldwide Medical Technologies, LLC |
| Product Code | FMI · General Hospital |
| Decision Date | Jun 25, 1998 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 880.5570 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Intended Use
The intended use for the Worldwide Medical Technologies Intracervical Block Needle is to inject anesthetic in the cervical area.
Device Story
The Worldwide Medical Technologies Intracervical Block Needle is a sterile, single-use device designed for the administration of anesthetic agents into the cervical region. It functions as a standard hypodermic needle, facilitating precise delivery of medication by a physician or qualified healthcare provider in a clinical setting. The device enables local anesthesia, which assists in pain management during gynecological or obstetric procedures. By providing a targeted delivery mechanism, it supports clinical decision-making regarding patient comfort and procedural tolerance.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
The device is a needle designed for cervical injection. It is a mechanical device with no electronic components, software, or energy sources. Materials and sterilization methods are consistent with standard medical needle manufacturing practices for Class II devices.
Indications for Use
Indicated for patients requiring local anesthesia in the cervical area during medical procedures.
Regulatory Classification
Identification
A hypodermic single lumen needle is a device intended to inject fluids into, or withdraw fluids from, parts of the body below the surface of the skin. The device consists of a metal tube that is sharpened at one end and at the other end joined to a female connector (hub) designed to mate with a male connector (nozzle) of a piston syringe or an intravascular administration set.
Related Devices
- K983897 — CERVICAL ANESTHESIA NEEDLE, CONTRACERVICAL ANESTHESIA NEEDLE, MODEL #'S 720209 30GAU X 4 MM, 720210 30GAU X 6MM, 720208G · Ri Mos. S.R.L. · Feb 1, 1999
- K973671 — ENDOCERVICAL BLOCK NEEDLE · A & A Medical, Inc. · Nov 26, 1997
- K021224 — ENDOCERVICAL BLOCK NEEDLE · Wallach Surgical Devices, Inc. · Jul 12, 2002
- K052365 — CERVINEEDLE DISPOSABLE CARTRIDGE SYRINGE · Rocket Medical Plc · Oct 17, 2005
- K980238 — GYNEX EXTENDED REACH NEEDLE · Gynex Corp. · Aug 21, 1998
Submission Summary (Full Text)
{0}------------------------------------------------
DEPARTMENT OF HEALTH & HUMAN SERVICES USA
DEPARTMENT OF HEALTH & HUMAN SERVICES
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Mr. Gary A. Lamoureux Worldwide Medical Technologies 125 Main Street North P.O. Box 505 Woodbury, CT 06798-0505
Re: K982097 WWMT Intracervical Block Needle
JUN 25 1998
Dated: June 12, 1998 Received: June 15, 1998 Regulatory Class: II 21 CFR 880.5570/Procode: 80 FMI 21 CFR 884.5100/Procode: 85 HEE
Dear Mr. Lamoureux:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address "http://www.fda.gov/cdrh/dsmaldsmamain.html".
Sincerely yours.
Lillian Yin, Ph.D.
Director, Division of Reproductive, Abdominal, Ear, Nose and Throat and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{1}------------------------------------------------
510(k) Number (if known):
K982097
Device Name: Worldwide Medical Technologies Intracervical Block Needle
Indications For Use:
The intended use for the Worldwide Medical Technologies Intracervical Block Needle is to inject anesthetic in the cervical area.
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Robert R Ratliff
(Division Sign-Off) Division of Reproductive, Abdominal, ENT, and Radiological Devices 98209 1 510(k) Number
Prescription Use
(Per 21 CFR 801.109)
OR
Over-The-Counter Use
(Optional Format 1-2-96)
EXHIBIT 1