ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY PART NUMBER GL825
K971234 · Alexander Mfg. Co. · MRZ · May 27, 1997 · General Hospital
Device Facts
| Record ID | K971234 |
| Device Name | ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY PART NUMBER GL825 |
| Applicant | Alexander Mfg. Co. |
| Product Code | MRZ · General Hospital |
| Decision Date | May 27, 1997 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 880.5725 |
| Device Class | Class 2 |
Intended Use
Replacement battery for Abbott Medical Electronics 190706 Life Care Pump 4,5 (micro infusion pump), 510(k) Number K840263. This battery is shipped only to customers who request a replacement battery for a particular device or to replace a competitor's replacement battery. The biomedical equipment technician therefore knows the intended use is as a replacement battery.
Device Story
Rechargeable battery (GL825) designed as a replacement power source for Abbott Medical Electronics 190706 Life Care Pump 4,5. Device functions as a direct power replacement for existing infusion pump batteries. Operated by biomedical equipment technicians in clinical settings. Provides electrical power to maintain pump operation. Benefits patient by ensuring continued functionality of life-sustaining infusion therapy.
Clinical Evidence
No clinical data; bench testing only.
Technological Characteristics
Rechargeable battery pack. Form factor and electrical specifications matched to the Abbott Medical Electronics 190706 Life Care Pump 4,5. No software or complex electronics.
Indications for Use
Indicated for use as a replacement battery for the Abbott Medical Electronics 190706 Life Care Pump 4,5 (micro infusion pump).
Regulatory Classification
Identification
An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.
Predicate Devices
- Abbott Medical Electronics 190706 Life Care Pump 4,5 (K840263)
Related Devices
- K971213 — ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY # GL825-P · Alexander Mfg. Co. · May 27, 1997
- K972780 — ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY PART NUMBER GL625 · Alexander Mfg. Co. · Oct 20, 1997
- K972779 — ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY PART NUMBER MS3030-P · Alexander Mfg. Co. · Oct 20, 1997
- K971237 — ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY PART NUMBER GL8108 · Alexander Mfg. Co. · May 27, 1997
- K971604 — ALEXANDER MANUFACTURING CO. RECHARGEABLE BATTERY PART NUMBER LP5-FP · Alexander Mfg. Co. · Jul 28, 1997
Submission Summary (Full Text)
{0}
DEPARTMENT OF HEALTH & HUMAN SERVICES
Public Health Service
MAY 27 1997
Food and Drug Administration
9200 Corporate Boulevard
Rockville MD 20850
Mr. Ken Heimendinger
510 (k) Department
Alexander Manufacturing Company
1511 South Garfield Place
Mason City, Iowa 50401
Re: K971234
Trade Name: Alexander Manufacturing Company Rechargeable
Battery Part Number GL825
Regulatory Class: II
Product Code: MRZ
Dated: March 19, 1997
Received: April 2, 1997
Dear Mr. Heimendinger:
We have reviewed your Section 510 (k) notification of intent to
market the device referenced above and we have determined the
device is substantially equivalent (for the indications for
use stated in the enclosure) to devices marketed in interstate
commerce prior to May 28, 1976, the enactment date of the
Medical Device Amendments, or to devices that have been
reclassified in accordance with the provisions of the Federal
Food, Drug, and Cosmetic Act (Act). You may, therefore,
market the device, subject to the general controls provisions
of the Act. The general controls provisions of the Act
include requirements for annual registration, listing of
devices, good manufacturing practice, labeling, and
prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II
(Special Controls) or class III (Premarket Approval), it may
be subject to such additional controls. Existing major
regulations affecting your device can be found in the Code of
Federal Regulations, Title 21, Parts 800 to 895. A
substantially equivalent determination assumes compliance with
the Good Manufacturing Practice for Medical Devices: General
(GMP) regulation (21 CFR Part 820) and that, through periodic
GMP inspections, the Food and Drug Administration (FDA) will
verify such assumptions. Failure to comply with the GMP
regulation may result in regulatory action. In addition, FDA
may publish further announcements concerning your device in
the Federal Register. Please note: this response to your
premarket notification submission does not affect any
obligation you might have under sections 531 through 542 of
{1}
Page 2 - Mr. Heimendinger
the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Timothy A. Ulatowski
Director
Division of Dental, Infection Control, and General Hospital Devices
Office of Device Evaluation
Center for Devices and Radiological Health
Enclosure
{2}
05-19-97 12:47PM FROM ALEXANDER MFG. US. 2018-03-04
510(k) Number: 971234
Device Name: GL825
Indications for Use:
Replacement battery for Abbott Medical Electronics 190706 Life Care Pump 4,5 (micro infusion pump), 510(k) Number K840263.
This battery is shipped only to customers who request a replacement battery for a particular device or to replace a competitor's replacement battery. The biomedical equipment technician therefore knows the intended use is as a replacement battery.
PLEASE DO NOT WRITE BELOW THIS LINE -
CONTINUE ON ANOTHER PAGE IF NEEDED
Concurrence of CDRH, Office of Device Evaluation (ODE)
(Division Sign-Off) [Handwritten signature]
Division of Dental Infection Control,
and General Hospital Devices
510(k) Number K971234
3-3