E-1 ESTHETIC COMPOSITE SYSTEM

K072746 · Tokuyama Dental Corporation · EBF · Dec 4, 2007 · Dental

Device Facts

Record IDK072746
Device NameE-1 ESTHETIC COMPOSITE SYSTEM
ApplicantTokuyama Dental Corporation
Product CodeEBF · Dental
Decision DateDec 4, 2007
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 872.3690
Device ClassClass 2
AttributesTherapeutic

Intended Use

The E-1 ESTHETIC COMPOSITE SYSTEM tooth shade resin material is a light-cured, radiopaque, submicron-filled composite resin system for use in dental procedures such as anterior and posterior restorations including occlusal surfaces, direct bonded composite veneers, diastema closures, and the repair of porcelain/composites.

Device Story

E-1 Esthetic Composite System is a light-cured, radiopaque, submicron-filled composite resin used by dentists for restorative procedures. Applied in clinical settings to restore tooth structure, close diastemas, or repair existing porcelain/composites. Material is placed by the clinician and cured using a dental light source. Provides aesthetic tooth-colored restoration; improves patient dental function and appearance.

Clinical Evidence

Bench testing only. Performance evaluated via flexural strength, water sorption, solubility, and depth of cure testing compared to predicate devices.

Technological Characteristics

Light-cured, radiopaque, submicron-filled composite resin. Class II device (21 CFR 872.3690).

Indications for Use

Indicated for use as a tooth shade resin material in dental procedures, including anterior and posterior restorations (occlusal surfaces), direct bonded composite veneers, diastema closures, and repair of porcelain/composites.

Regulatory Classification

Identification

Tooth shade resin material is a device composed of materials such as bisphenol-A glycidyl methacrylate (Bis-GMA) intended to restore carious lesions or structural defects in teeth.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ K07 2746 # 510(k) SUMMARY Tokuyama Dental Corporation E-1 ESTHETIC COMPOSITE SYSTEM ### Name of Device DEC 0 4 2007 | Trade or Proprietary Name: | E-1 ESTHETIC COMPOSITE SYSTEM | |----------------------------|-------------------------------| | Common Name: | tooth shade resin material | | Classification Name: | material, tooth shade, resin | | Product Code: | EBF | ### Preparation Date September 12, 2007 #### 510(k) Sponsor Tokuyama Dental Corporation 38-9 Taitou 1-chome, Taitou-ku Tokyo 110-0016 Japan #### 510(k) Sponsor Contact Keith A. Barritt Fish & Richardson P.C. 1425 K Street, N.W., Suite 1100 Washington, DC 20005 Phone: (202) 783-5070 Facsimile: (202) 783-2331 #### Intended Use The E-1 ESTHETIC COMPOSITE SYSTEM tooth shade resin material is a light-cured, radiopaque, submicron-filled composite resin system for use in dental procedures such as anterior and posterior restorations including occlusal surfaces, direct bonded composite veneers, diastema closures, and the repair of porcelain/composites. {1}------------------------------------------------ ## Technological Characteristics and Substantial Equivalence The E-1 ESTHETIC COMPOSITE SYSTEM device is substantially equivalent to multiple predicate devices (K#980051 and K#051808) with respect to flexural strength, water sorption, solubility, and depth of cure for various curing times. Although the E-1 ESTHETIC COMPOSITE SYSTEM device may have slightly different performance characteristics than the predicate devices, these differences do not raise new questions of safety or effectiveness. All ingredients used in the E-1 ESTHETIC COMPOSITE SYSTEM are biocompatible, as demonstrated by their common use in similar dental devices such as the predicate devices identified above. {2}------------------------------------------------ Image /page/2/Picture/1 description: The image shows the seal of the Department of Health and Human Services (HHS). The seal features the department's name encircling a stylized caduceus symbol. The caduceus is a symbol of medicine and health, often associated with healthcare organizations. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 DEC 0 4 2007 Tokuyama Dental Corporation C/O Mr. Keith A. Barritt, Esq. Fish & Richardson P.C. 1425 K Street, N.W., Suite 1100 Washington, District of Columbia 20005 Re: K072746 Trade/Device Name: E-1 Esthetic Composite System Regulation Number: 21 CFR 872.3690 Regulation Name: Tooth Shade Resin Material Regulatory Class: II Product Code: EBF Dated: September 26, 2007 Received: October 2, 2007 Dear Mr. Barritt: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {3}------------------------------------------------ Page 2- Mr. Barritt Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing vour device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0115. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html. Sincerely yours. Sutte y. Michie o m.D. Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ Indications for Use 510(k) Number (if known): unknown K072746 Device Name: E-1 ESTHETIC COMPOSITE SYSTEM Indications for Use: The E-1 ESTHETIC COMPOSITE SYSTEM is for use as a tooth shade resin material in dental procedures. Prescription Use (21 CFR 801 Subpart D) AND/OR Over-The-Counter Use (21 CFR 801 Subpart C) PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED Concurrence of CDRH, Office of Device Evaluation (ODE) Susan Thomas Apostleship, Government, of Daniel Davis. KO72741 Page 1 of 1
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%