COLORISE

K070677 · Zhermack S.P.A. · ELW · May 11, 2007 · Dental

Device Facts

Record IDK070677
Device NameCOLORISE
ApplicantZhermack S.P.A.
Product CodeELW · Dental
Decision DateMay 11, 2007
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 872.3660
Device ClassClass 2

Intended Use

COLORISE is a two-component (base/catalyst) polyvinylsiloxane (VPS) dental impression material intended for use in a performed impression tray and used to reproduce the structure of a patient's teeth and gums.

Device Story

COLORISE is a two-component polyvinylsiloxane (VPS) dental impression material. It is used by dental professionals to create accurate impressions of a patient's teeth and gums. The material is placed into a performed impression tray, which is then inserted into the patient's mouth to capture the anatomical structure. Once set, the resulting impression serves as a mold for dental restorations or diagnostic models. The device is used in a clinical dental setting.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Two-component (base/catalyst) polyvinylsiloxane (VPS) dental impression material. Class II device under 21 CFR 872.3660.

Indications for Use

Indicated for use as a dental impression material to reproduce the structure of a patient's teeth and gums using a performed impression tray.

Regulatory Classification

Identification

Impression material is a device composed of materials such as alginate or polysulfide intended to be placed on a preformed impression tray and used to reproduce the structure of a patient's teeth and gums. The device is intended to provide models for study and for production of restorative prosthetic devices, such as gold inlays and dentures.

Special Controls

*Classification.* Class II (Special Controls).

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo consists of a stylized eagle-like symbol with three human profiles incorporated into its design. The text "DEPARTMENT OF HEALTH AND HUMAN SERVICES, USA" is arranged in a circular fashion around the symbol. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 Zhermack S.p.A C/O Mr. Gerald W. Shipps Regulatory Affairs Consultant Cascades Device Consulting Associates 19379 Blue Lake Loop Bend, Oregon 97702 MAY 1 1 2007 Re: K070677 Trade/Device Name: COLORISE Regulation Number: 872.3660 Regulation Name: Impression Material Regulatory Class: II Product Code: ELW Dated: March 10, 2007 Received: March 12, 2007 Dear Mr. Shipps: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {1}------------------------------------------------ Page 2 - Mr. Shipps Please be advised that FDA's issuance of a substantial equivalence determination docs not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0115. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html. Sincerely yours. Suri Kunre Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ Image /page/2/Picture/0 description: The image shows the logo for "Zhermack BEYOND INNOVATION". The word "Zhermack" is in a bold, sans-serif font, with the registered trademark symbol to the right of the "k". Below "Zhermack" is the phrase "BEYOND INNOVATION" in a smaller, sans-serif font. To the right of the text is a graphic consisting of two parallel, angled lines. ## INDICATIONIS FOR USE n 510(k) Number (if known): - 5070677 Device Name: COLORISE two-component COLORISE is a conventional Use: Indications for (base/catalyst) polyvinylsiloxane (VPS) dental impression material intended (base/catalyot) performed impression tray and used to reproduce the structure of a patient`s teeth and gums. Prescription Use______________________________________________________________________________________________________________________________________________________________ AND/OR Over-The-Counter Use _________________________________________________________________________________________________________________________________________________________ (Part 21 CFR 801 Subpart D) (21 CFR 807 Subpart C) ## (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Page 1 of 1 Suin Runa f Antimicrobial Stewardship in a Dental Hospital biopsy, ion Control, Dental Devices COLORISE Rev. 0 February, 06 2007
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%