REGEN BIOCEMENT
K063010 · Steiner Laboratories · LYC · Nov 28, 2006 · Dental
Device Facts
| Record ID | K063010 |
| Device Name | REGEN BIOCEMENT |
| Applicant | Steiner Laboratories |
| Product Code | LYC · Dental |
| Decision Date | Nov 28, 2006 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 872.3930 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Intended Use
REGEN BIOCEMENT is intended to be used as a bone grafting material in the maxillofacial region.
Device Story
REGEN BIOCEMENT is a bone grafting material used in the maxillofacial region. It serves as a scaffold or filler to support bone repair and regeneration. The material is applied by clinicians during surgical procedures to address bone defects. It functions by providing a biocompatible matrix that facilitates natural bone healing and integration. The device is intended for prescription use only.
Clinical Evidence
No clinical data provided; substantial equivalence determination based on regulatory classification and intended use.
Technological Characteristics
Bone grafting material classified under 21 CFR 872.3930, Product Code LYC. Material properties and specific standards are not detailed in the provided documentation.
Indications for Use
Indicated for use as a bone grafting material in the maxillofacial region for patients requiring bone augmentation or repair.
Regulatory Classification
Identification
Bone grafting material is a material such as hydroxyapatite, tricalcium phosphate, polylactic and polyglycolic acids, or collagen, that is intended to fill, augment, or reconstruct periodontal or bony defects of the oral and maxillofacial region.
Special Controls
*Classification.* (1) Class II (special controls) for bone grafting materials that do not contain a drug that is a therapeutic biologic. The special control is FDA's “Class II Special Controls Guidance Document: Dental Bone Grafting Material Devices.” (See § 872.1(e) for the availability of this guidance document.)(2) Class III (premarket approval) for bone grafting materials that contain a drug that is a therapeutic biologic. Bone grafting materials that contain a drug that is a therapeutic biologic, such as biological response modifiers, require premarket approval.
(c)
*Date premarket approval application (PMA) or notice of product development protocol (PDP) is required.* Devices described in paragraph (b)(2) of this section shall have an approved PMA or a declared completed PDP in effect before being placed in commercial distribution.
Related Devices
- K030195 — BBP BONE SUBSTITUTES · Oct, USA, Inc. · Jun 17, 2004
- K033098 — OSTEOGEN SBRG · Impladent , Ltd. · Apr 27, 2004
- K101718 — OSSEOCONDUCT · Steiner Laboratories Div of Steiner Healthcare, LLC · Oct 26, 2010
- K970569 — BIO-BLOCKS · Geistlich-Pharma · Aug 14, 2000
- K051091 — SYNTHOGRAFT · Bicon, Inc. · Sep 1, 2005
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle with its wings spread, and the words "DEPARTMENT OF HEALTH & HUMAN SERVICES. USA" are arranged in a circular pattern around the eagle. The logo is black and white.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Mr. Gregory Gene Steiner CEO Steiner Laboratories 590 Farrington Hwy, #524 Suite 132 Kapolei, Hawaii 96707
NOV 2 8 2006
Re: K063010 Trade/Device Name: REGEN BIOCEMENT Regulation Number: 872.3930 Regulation Name: Bone Grafting Material Regulatory Class: II Product Code: LYC Dated: September 27, 2006 Received: October 17, 2006
Dear Mr. Steiner:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
{1}------------------------------------------------
Page 2 - Mr. Steiner
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0115. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely vours
word Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
K063010
## Indications for Use
510(k) Number (if known): _______________
Device Name: REGEN BIOCEMENT
Indications for Use: REGEN BIOCEMENT is intended to be used as a bone grafting material in the maxillofacial region.
Prescription Use X (Part 21 CFR 801 Subpart D)
AND/OR
Over-The-Counter Use (21 CFR 801 Subpart C)
## (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED)
## Concurrence of CDRH, Office of Device Evaluation (ODE)
Susan Runner
Anesthesiology, General Hosp. 1,
Control, Dental Devices
K94306
Page 1 of 1
l