D.SIGN 84

K014042 · Ivoclar Vivadent, Inc. · EJS · Feb 22, 2002 · Dental

Device Facts

Record IDK014042
Device NameD.SIGN 84
ApplicantIvoclar Vivadent, Inc.
Product CodeEJS · Dental
Decision DateFeb 22, 2002
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 872.3060
Device ClassClass 2
AttributesTherapeutic

Intended Use

d-Sign 84 is intended to be used with conventional feldpathic porcelains. Also d-Sign 84 intended to be used as inlays, onlays, crowns, posts, attachments, short and long span bridges, and PFM crowns.

Device Story

d-Sign 84 is a gold-based dental alloy used by dental professionals for fabricating prosthetic restorations. The alloy serves as a substrate for conventional feldspathic porcelains to create porcelain-fused-to-metal (PFM) crowns, bridges, inlays, onlays, and posts. The device is processed in a dental laboratory setting to form the metal framework of the restoration, which is then veneered with porcelain. The final restoration is placed by a dentist to restore tooth structure or replace missing teeth, providing structural support and aesthetic function for the patient.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Gold-based alloy for dental use. Form factor is a casting alloy for dental restorations. Class II device under 21 CFR 872.3060.

Indications for Use

Indicated for use in dental restorations including inlays, onlays, crowns, posts, attachments, and short or long span bridges, as well as porcelain-fused-to-metal (PFM) crowns, in conjunction with conventional feldspathic porcelains.

Regulatory Classification

Identification

A noble metal alloy is a device composed primarily of noble metals, such as gold, palladium, platinum, or silver, that is intended for use in the fabrication of cast or porcelain-fused-to-metal crown and bridge restorations.

Special Controls

*Classification.* Class II (special controls). The special control for these devices is FDA's “Class II Special Controls Guidance Document: Dental Noble Metal Alloys.” The devices are exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 872.9. See § 872.1(e) for availability of guidance information.

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circle with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of an eagle or bird with three curved lines representing its wings. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 ## FEB 2 2 2002 Mr. Andrejeet S. Gulati Quality Assurance Manager Ivoclar Vivadent, Incorporated 175 Pineview Drive Amherst, New York 14228 Re: K014042 Trade/Device Name: D. Sign 84 Regulation Number: 872.3060 Regulation Name: Gold-based Alloys and Precious Metal Alloys for Clinic Use Regulatory Class: II Product Code: EJS Dated: December 4, 2001 Received: December 7, 2001 Dear Mr. Gulati: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements {1}------------------------------------------------ ## Page 2 - Mr. Gulati of the Act or any Federal statutes and regulations administered by other Federal agencies. or the rice or ally a vith all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for questions on the promotion and of Compliance week, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html Sincerely yours, Timothy A. Ulatowski Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health {2}------------------------------------------------ | K614042 | |------------------| | Not yet assigned | 510(k) Number (if known): Device Name: d. SIGN 84 (R&D Project # DW 215#13) Indications For Use: d-Sign 84 is intended to be used with conventional feldpathic porcelains. Also a-olgh 04 intended to be assa mas, conus crowns, conus crowns, posts, attachments, short and long span bridges, and PFM crowns. (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) | Concurrence of CDRH, Office of Device Evaluation (ODE) | | |--------------------------------------------------------|--| |--------------------------------------------------------|--| OR Prescription Use Y (Per 21 CFR 801.109) Over-The-Counter Use__________________________________________________________________________________________________________________________________________________________ (Optional Format 1-2-96) Susan Quinn (Division Sign-Off) Division of Dental, Infection Control, and General Hospital, 510(k) Number _
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%