(64 days)
This infrared heat lamp is intended to emit energy in the infrared spectrum to provide topical heating for the purpose of elevating tissue temperature. This unit may be used to provide temporary relief of minor muscle and joint pain and stiffness, minor arthritis pain, or muscle spasm. This unit may temporarily increase local blood circulation, and may be used to promote relaxation of the muscle tissue.
The Nu Photonics Pain Therapist consists of a collection of both infrared and red diodes packaged in a compact plastic case. The system emits pulsed light in the infrared spectrum to provide topical heating, arranged in an area covering just over 11 square inches. The red diodes provide a visible indication that the unit is in operation. The system incorporates an "Auto Off" feature, in the event that the user may inadvertently leave the device on.
The provided text is a Premarket Notification [510(k)] Summary for the "Nu Photonics Pain Therapist," an infrared heat lamp. It does not contain information about acceptance criteria, device performance, a study proving the device meets acceptance criteria, sample sizes, expert involvement, adjudication methods, MRMC studies, or standalone algorithm performance.
The document primarily focuses on:
- Device Description: An infrared heat lamp consisting of infrared and red diodes packaged in a compact plastic case, emitting pulsed light for topical heating. It has an "Auto Off" feature.
- Intended Use: To emit energy in the infrared spectrum for topical heating, elevating tissue temperature, and providing temporary relief of minor muscle and joint pain, stiffness, minor arthritis pain, or muscle spasm. It may temporarily increase local blood circulation and promote muscle tissue relaxation.
- Predicate Device Comparison: The device is stated to be substantially equivalent to other infrared lamps on the market, sharing similar intended uses, technological characteristics (infrared diodes for topical heating), temperatures, coverage area, and being handheld for use on or just over the skin.
- Testing: Only "functional performance testing and electrical leakage testing" are mentioned. No specific acceptance criteria or performance results from these tests are provided.
- Conclusion: The device has the same intended uses and similar technological characteristics as predicate devices, performs as intended, and raises no new safety or effectiveness issues.
Therefore, I cannot provide the requested table or information regarding acceptance criteria, device performance, or a study proving it meets such criteria, as this information is not present in the provided text.
The document is a 510(k) submission, which aims to demonstrate "substantial equivalence" to a legally marketed predicate device, rather than proving efficacy against a set of predefined performance criteria through a detailed clinical study in the way a PMA (Premarket Approval) might require for novel devices. The testing described (functional performance and electrical leakage) appears to be for safety and basic operational assurance, not for demonstrating clinical effectiveness against specific performance metrics for pain relief or tissue temperature elevation.
{0}------------------------------------------------
Premarket Notification [510(k)] Summary
(per 21 CFR 807.92)
1. Submitted by:
Nu Photonics, Inc. P.O. Box 22599 Denver, CO 80222
| Contact Person: | William Michael BrockChairman of the Board |
|---|---|
| Telephone: | 303-922-9200 |
| Facsimile: | 303-922-9800 |
August 24, 2001 Date Prepared:
2. Device Name
| Trade/Proprietary Name: | Nu Photonics Pain Therapist |
|---|---|
| Common/Usual Name: | Infrared heat lamp |
| Classification Name: | Infrared lamp (per 21 CFR 890.5500) |
Predicate Device: 3.
The Nu Photonics Pain Therapist is substantially equivalent to other infrared lamps on the market, such as the Acubeam system manufactured by Light Force Therapy, Inc., the Light Patch manufactured by BioScan, Inc., the Photonic Stimulator manufactured by Bales Scientific, Inc., and the Pain-X 2000, manufactured by Diomedics, Inc.
Intended use of the device 4.
This infrared heat lamp is intended to emit energy in the infrared spectrum to provide topical heating for the purpose of elevating tissue temperature. This unit may be used to provide temporary relief of minor muscle and joint pain and stiffness, minor arthritis pain, or muscle spasm. This unit may temporarily increase local blood circulation, and may be used to promote relaxation of the muscle tissue.
Description of the Device 5.
The Nu Photonics Pain Therapist consists of a collection of both infrared and red diodes packaged in a compact plastic case. The system emits pulsed light in the infrared spectrum to provide topical heating, arranged in an area covering just
{1}------------------------------------------------
20F2
over 11 square inches. The red diodes provide a visible indication that the unit is in operation.
The system incorporates an "Auto Off" feature, in the event that the user may inadvertently leave the device on.
Summary of the technological characteristics of the device 6. compared to the predicate device.
The Nu Photonics Pain Therapist and the above referenced predicate devices The Hu Photonios Failer in 21 CFR 890.5500. These devices utilize infrared diodes to provide topical heating for the temporary relief of muscle and/or joint unious to provide topical nealered by these devices are the same, using a similar pain. The tomporatures asimilar coverage area. The devices are handheld, and number of alouse of or the skin or held just over the skin to provide the heating.
Testing 7.
Testing of the Nu Photonics Pain Therapist included functional performance testing and electrical leakage testing.
Conclusions 8.
Based upon the testing and comparison to the predicate devices, the Nu Photonics Pain Therapist has the same intended uses, with similar technological characteristics. The system performs as intended and raises no new safety or effectiveness issues.
{2}------------------------------------------------
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is an abstract symbol resembling an eagle or bird with three stylized wing-like shapes.
Public Health Service
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
OCT - 92001
Nu Photonics, Inc. c/o Entela, Inc. Ned Devine, Program Manager III 3033 Madison Avenue, SE Grand Rapids, Michigan 49548
Re: K012508
Trade/Device Name: Nu Photonics Pain Therapist Regulation Number: 21 CFR 890.5500 Regulation Name: Infrared lamp Regulatory Class: Class II Product Code: IL Y Dated: August 31, 2001 Received: September 28, 2001
Dear Mr. Devine:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set
{3}------------------------------------------------
Page 2 - Mr. Ned Devine
forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic form in the quality by out of visions (Sections 531-542 of the Act); 21 CFR 1000-1050.
This letter will allow you to begin marketing your device as described in your Section 510(k) I mis lotter with and wy of substantial equivalence of your device of your device to a legally premated predicated. The a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4659. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Oiner goneral Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html
Sincerely yours,
Celia M. Witten, Ph.D., M.D. Director Division of General, Restorative and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Statement of Indications for Use
Page 1 of 1
510(k) Number (if known): K 012508
Device Name: Nu Photonics Pain Therapist
Indications for Use:
This infrared heat lamp is intended to emit energy in the infrared spectrum This infrared noat lamp to the purpose of elevating tissue temperature. to provide topiou. noaling for vide temporary relief of minor muscle and This unit may be assu to provisitis pain, or muscle spasm. This unit joint pair and blimises, local blood circulation, and may be used to promote relaxation of the muscle tissue.
(PLEASE DO NOT WRITE BELOW THIS LINE – CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE)
Prescription Use: (per 21 CFR 801.109) OR
Mark N. Milkerson
for Division Sign Off
al. Restorative and Neurological Devices
510(k) Number
Over the Counter Use: (Optional Format 1-2-96)
N/A